Home
Back
Evaporative Cooler CFM Formula:
| From: | To: |
The Evaporative Cooler CFM Conversion is a rule of thumb calculation that converts square footage to the required CFM (Cubic Feet per Minute) for an evaporative cooler. This helps in selecting the appropriately sized cooler for a given space.
The calculator uses the simple formula:
Where:
Explanation: This formula provides a general guideline for determining the minimum CFM rating needed for an evaporative cooler based on the square footage of the space.
Details: Proper CFM calculation ensures that your evaporative cooler is adequately sized for your space. An undersized unit won't cool effectively, while an oversized unit may cycle too frequently and not remove humidity properly.
Tips: Enter the square footage of the area you want to cool. The calculator will provide the recommended CFM for an evaporative cooler. Make sure to measure your space accurately for best results.
Q1: Is this calculation accurate for all spaces?
A: This is a general rule of thumb. Actual CFM requirements may vary based on ceiling height, insulation, climate, and other factors.
Q2: What if my space has high ceilings?
A: For spaces with ceilings higher than 8 feet, you may need to increase the CFM calculation to account for the additional volume.
Q3: Can I use this for whole-house cooling?
A: This calculation works for single-room or open-space cooling. Whole-house systems require more complex calculations considering ductwork and multiple rooms.
Q4: What's the typical CFM range for residential evaporative coolers?
A: Residential evaporative coolers typically range from 3,000 to 10,000 CFM, depending on the size of the space.
Q5: How often should I run my evaporative cooler?
A: During hot weather, evaporative coolers can run continuously. Proper maintenance and water management are important for efficient operation.